Dover Roller Shutters designs specialized locking mechanisms to suit each vehicle shutter door. We will recommend certain locks for certain products however the decision is down to you.
Scroll down to see our full range of vehicle shutter locking options.
Feel free to contact us for any queries regarding locking mechanisms.
The Dover hasp and Staple is made from forged steel and provides a high strength lock at an economical price. The Hasp and Staple lock requires a padlock ( not supplied).
The Hasp and Staple is the industry standard lock for the typical van seen on the roads of Britain today.
The Hasp and Staple lock is supplied loose unless specified otherwise to allow the van builder to mount the lock in the most suitable location.
The revolutionary Lift Bar was developed by Fred Dover in the 1970’s for the emergency vehicle door market in Europe and North America. Many have tried to copy but none have been able to match the robust strength and positive locking power of the Dover Bar Lock.
Fabricated entirely from Stainless Steel except for the Nylon Moulded pivot covers (pictured right) this lock is designed to withstand the harsh working environment of our emergency vehicles.
Today this lock is fitted to all emergency vehicles with roller shutters in North America.
Optional: Locking Lift Bar
‘L’ Handles are available in both key locking and non locking assemblies. These locks are chrome plated to withstand the harsh environment of the transportation industry. Where an L Handle is ordered the lock is fitted with the locking bars to the bottom rail.
Lock holes are left to be cut into the tracks by the customer to ensure accurate location. The inside of the L Handle locks are comprised of pivoting cams and aluminium locking bars that extend through tracks at the end of the bottom rail.
Where an ‘L’ Handle is fitted to a Standard Bottom Rail the lip is notched to accommodate the hand room needed to operate the lock. Locks can be keyed alike or to separate key numbers.
The Centre Lock (Also known as the Traverse Lock) is a 2 way two point key operated lock with a neat appearance. It is normally fitted to the bottom rail and locking bars and are extended into the tracks when locked. The lock can be fitted to the lath higher up the door making the function of locking and unlocking more ergonomic.
The Centre lock does not require the bottom rail to be noticed if it has a lip and can be operated both from the inside and the outside. On multiple doors these locks can be supplied keyed alike or with separate key numbers.
The MS (Maximum Security) Lock is designed to fit the 1” track and single spring set up for truck panel overhead doors. It is made of both stamped and cast steel components and either comes with an E-Coated or Zinc finish.
The 77 Lock is designed to fit the 2” track and dual spring set up for truck panel overhead doors. It is made of both stamped and cast steel components and either comes with an E-Coated or Zinc finish.”
We are available to help with any queries you may have, whether it be sales or customer service related, or advice on a technical issue.
Whatever your issue is, you can count on us to support you, the relevant team can be found here:
SUPPORT